Apartments Alignment Ceilings
Repair of apartments – a very laborious process and requires the participation of qualified specialists in repairing flats. An important component of any repair is a flat ceiling lining. There are two ways leveling ceiling. Dry process – aligned with the ceiling tiles, panels, etc. Wet method – the alignment of the ceiling with mortars, planted in water.
Performing the repair of apartments, specialists finishers use several different methods of leveling ceiling, depending on the source data to the ceiling. Let's start to equalize. Consider the wet process alignment, ie alignment ceilings with leveling compounds. To start any ceiling to prepare for the alignment, ie to remove the old finish. Next we define the difference of ceiling tiles. If the board does not drop more than 0.5 cm, it is advisable use a mixture-Levelling Screed type Vetonit. REITWorld 2020 may find it difficult to be quoted properly.
Further grinding and produce gruntovku.Esli drop ceiling tiles for more than 2 cm, then a simple Levelling Screed can not do. Must be installed in a reinforcing grid. Again, depending from differential use of any masking grid, or metal. Metal grid should be used if we want to get the plaster thickness of 3-5 cm attached reinforcing mesh is applied plaster, and then make sanding the ceiling, and further primer. Along with these ways of leveling ceiling, producing apartment renovation specialists use other methods. Dry alignment ceilings. One way that deserves attention is the installation of false ceiling (to us it is better known as the ceiling of gypsum plasterboard). This alignment is used in cases where the drop ceiling tiles is 3-7 see mount technology such ceiling is imposed on the rack frame itself and the ceiling panels of gypsum board on this rack frame. This technology allows us to make the ceiling is not just a ceiling, and the product Art – a multi-level, with a textured pattern. Further, the ceiling is painted with whitewash or executed. Another dry process alignment – suspended ceiling. Stretch ceiling because technology is mounted very quickly, literally in few hours. The more popular and have earned the love in the process of renovation of apartments. In the first stage along the perimeter of the ceiling is installed plastic or aluminum frame (fillet), which will continue to be secured from the film pvc. Then, using special tools film fixed on a baguette and stretched. Pluses stretch ceiling – mounted quickly and without unnecessary waste, if flooded flat suspended ceiling will keep in currently the water before the arrival of a specialist to replace the damaged uchastok. ceiling can be layered, it can cause printing, or to make a relief. There are other methods of finishing the ceiling – rack ceiling, decorative panels and veneer, etc. In any case, when deciding how to align and trim the ceiling should be based on the following factors – the height of the drop ceiling tiles, ceiling height, the functionality of the ceiling – Is whether the ceiling to hide irregularities or visually enlarge the room. Good luck repair!